Page 99000768 "Manufacturing Setup"
Base Application · Microsoft.Manufacturing.Setup
Across versions
- BC23-30present
Neighbourhood 7 connected objects and pages
Base Application · Microsoft.Manufacturing.Setup · BC23-30 · source at ea08af5e · facts from BC29
Properties
| Property | Value |
|---|---|
| Caption | Manufacturing Setup |
| SourceTable | Manufacturing Setup |
| PageType | Card |
| UsageCategory | Administration |
| ApplicationArea | Manufacturing, Planning |
Fields on this page
Layout controls in source order, grouped by the container they sit in. Shows: the table field a control is bound to (or its expression as written); ToolTip: the control’s own, else the bound field’s (marked).
| Group | Control | Shows | ToolTip |
|---|---|---|---|
| General | Normal Starting Time | Normal Starting Time | Specifies the normal starting time of the workday. from the table field |
| Normal Ending Time | Normal Ending Time | Specifies the normal ending time of a workday. from the table field | |
| Preset Output Quantity | Preset Output Quantity | Specifies what to show in the Output Quantity field of a production journal when it is first opened. from the table field | |
| Default Consum. Calc. Based on | Default Consum. Calc. Based on | Specifies default calculation based on, used for consumption calculation. Whether the calculation of the quantity to consume is based on the actual output or on the expected output (the quantity of finished goods that you expect to produce). from the table field | |
| Show Capacity In | Show Capacity In | Specifies which capacity unit of measure to use by default to record and track capacity. from the table field | |
| Planning Warning | Planning Warning | Specifies whether to run the MRP engine to detect if planned shipment dates cannot be met. from the table field | |
| Doc. No. Is Prod. Order No. | Doc. No. Is Prod. Order No. | Specifies that the production order number is also the document number in the ledger entries posted for the production order. from the table field | |
| Dynamic Low-Level Code | Dynamic Low-Level Code | Specifies low-level codes are dynamically assigned to each component in a product structure. Note that this may affect performance. The top final assembly level is denoted as level 0, the end item. The higher the low-level code number, the lower the item is in the hierarchy. The codes are used in th… from the table field | |
| Cost Incl. Setup | Cost Incl. Setup | Specifies whether the setup times are to be included in the cost calculation of the Standard Cost field. from the table field | |
| Copy Loc. to Cap. Val. Entries | Copy Loc. to Cap. Val. Entries | Specifies whether the Location Code from the production order is copied to value entries linked to capacity ledger entries. When enabled, Inventory Posting Setup for that specific location is used. When disabled, Location Code remains blank on capacity value entries and Inventory Posting Setup for b… from the table field | |
| Inc. Non. Inv. Cost To Prod | Inc. Non. Inv. Cost To Prod | Specifies whether to include the cost of non-inventory items in the cost of produced items. from the table field | |
| Load SKU Cost on Manufacturing | Load SKU Cost on Manufacturing | Specifies if you want to load SKU Cost in the item at the time of manufacturing. from the table field | |
| Finish Order without Output | Finish Order without Output | Specifies that status of orders with no output can be changed to finished and the WIP will be written off to Inventory Adjustment Account. from the table field | |
| Default Gen. Bus. Post. Group | Default Gen. Bus. Post. Group | Specifies the default general business posting group for production orders. from the table field | |
| Default Flushing Method | Default Flushing Method | Specifies default flushing method assigned to new items. A different flushing method on item cards will override this default. from the table field | |
| Numbering | Simulated Order Nos. | Simulated Order Nos. | Specifies the number series code to use when assigning numbers to a simulated production order. from the table field |
| Planned Order Nos. | Planned Order Nos. | Specifies the number series code to use when assigning numbers to a planned production order. from the table field | |
| Firm Planned Order Nos. | Firm Planned Order Nos. | Specifies the number series code to use when assigning numbers to firm planned production orders. from the table field | |
| Released Order Nos. | Released Order Nos. | Specifies the number series code to use when assigning numbers to a released production order. from the table field | |
| Work Center Nos. | Work Center Nos. | Specifies the number series code to use when assigning numbers to work centers. from the table field | |
| Machine Center Nos. | Machine Center Nos. | Specifies the number series code to use when assigning numbers to machine centers. from the table field | |
| Production BOM Nos. | Production BOM Nos. | Specifies the number series code to use when assigning numbers to production BOMs. from the table field | |
| Routing Nos. | Routing Nos. | Specifies the number series code to use when assigning numbers to routings. from the table field | |
| Planning | Current Production Forecast obsolete Pending 27.0; #if not CLEAN27 | Current Production Forecast | Specifies the name of the relevant demand forecast to use to calculate a plan. Use Inventory Setup page to change this field. from the table field |
| Use Forecast on Locations obsolete Pending 27.0; #if not CLEAN27 | Use Forecast on Locations | Specifies that actual demand for the selected demand forecast is nettet for the specified location only. If you leave the check box empty, the program regards the demand forecast as valid for all locations. Use Inventory Setup page to change this field. from the table field | |
| Use Forecast on Variants obsolete Pending 27.0; #if not CLEAN27 | Use Forecast on Variants | Specifies that actual demand for the selected demand forecast is nettet for the specified item variant. If you leave the check box empty, the program regards the demand forecast as valid for all variants. Use Inventory Setup page to change this field. from the table field | |
| Default Safety Lead Time obsolete Pending 27.0; #if not CLEAN27 | Default Safety Lead Time | Specifies a time period that is added to the lead time of all items that do not have another value specified in the Safety Lead Time field. Use Inventory Setup page to change this field. from the table field | |
| Blank Overflow Level obsolete Pending 27.0; #if not CLEAN27 | Blank Overflow Level | Specifies how the planning system should react if the Overflow Level field on the item or SKU card is empty. Use Inventory Setup page to change this field. from the table field | |
| Combined MPS/MRP Calculation obsolete Pending 27.0; #if not CLEAN27 | Combined MPS/MRP Calculation | Specifies if both master production schedule and material requirements plan are run when you choose the Calc. Regenerative Plan action in the planning worksheet. Use Inventory Setup page to change this field. from the table field | |
| Components at Location | Components at Location | Specifies the inventory location from where the production order components are to be taken. from the table field | |
| Default Dampener Period obsolete Pending 27.0; #if not CLEAN27 | Default Dampener Period | Specifies a period of time during which you do not want the planning system to propose to reschedule existing supply order’s forward. This value in this field applies to all items except for items that have a different value in the Dampener Period field on the item card. When a dampener time is set,… from the table field | |
| Default Dampener % obsolete Pending 27.0; #if not CLEAN27 | Default Dampener % | Specifies a percentage of an item’s lot size by which an existing supply must change before a planning suggestion is made. Use Inventory Setup page to change this field. from the table field | |
| Manual Scheduling | Manual Scheduling | Specifies that the End/Due Dates on the production have been scheduled manually. from the table field | |
| Safety Lead Time for Man. Sch. | Safety Lead Time for Man. Sch. | Specifies the time that will be added to the End date to calculate the Due Date when the production order is manually scheduled. from the table field |
Triggers
OnOpenPage
Relations
- source table Table 99000765 “Manufacturing Setup”
Pages and codeunits on this table
- Table 99000765 “Manufacturing Setup” (drill-down page)
- Table 99000765 “Manufacturing Setup” (lookup page)
Extended by
Calls
From the extracted call graph of BC29 (graphify-al on the snapshot checkout): calls whose target is known from a declared type or an Object::"Name" argument. Interface dispatch and calls through events are not counted, so the list is not complete.
- Codeunit 99000779 “Manufacturing Setup Notif.” (1 call:
OnOpenPage → ShowPlanningFieldsMoveNotification)
Recent changes
- 2026-10-02 #12066 Bugs/remove asm inv mfg clean27 tags for wave2 2026 (main, BC30, obsoletion)
- 2026-08-16 #9067 Production Definition Wizard - Implementation (main, BC30, feature)
Documented on Microsoft Learn
- Reverse and correct production order transactions
- Configure manufacturing processes
- Set up subcontracting
Source: AL metadata extracted from the code (names, ids, signatures, properties); no code bodies (D10).
Ask your agent
Procedure bodies are not stored here (D10). The call sections above are our own, per object, from the BC29 call graph. For a procedure body or the calls of one procedure, ask bc-code-atlas (external, by Stefan Maron, MIT; default corpus w1-28), which the bc-observatory plugin connects: bcatlas_resolve_node(object_type: "page", object_name: "Manufacturing Setup"), then bcatlas_get_procedure_body or bcatlas_get_neighbors on the returned id.