Page 99000755 "Work Center List"
Base Application · Microsoft.Manufacturing.WorkCenter
Across versions
- BC23-26present
- BC27declaration changed
- BC281 procedures added
- BC29-30unchanged
Neighbourhood 8 connected objects and pages
Base Application · Microsoft.Manufacturing.WorkCenter · captioned “Work Centers” · BC23-30 · source at ea08af5e · facts from BC29
Properties
| Property | Value |
|---|---|
| Caption | Work Centers |
| SourceTable | Work Center |
| PageType | List |
| UsageCategory | Lists |
| ApplicationArea | Manufacturing |
Fields on this page
Layout controls in source order, grouped by the container they sit in. Shows: the table field a control is bound to (or its expression as written); ToolTip: the control’s own, else the bound field’s (marked).
| Group | Control | Shows | ToolTip |
|---|---|---|---|
| Control1 | No. | No. | Specifies the number of the involved entry or record, according to the specified number series. from the table field |
| Name | Name | Specifies the name of the work center. from the table field | |
| Name 2 | Name 2 | — | |
| Alternate Work Center | Alternate Work Center | Specifies an alternate work center. from the table field | |
| Work Center Group Code | Work Center Group Code | Specifies the work center group, if the work center or underlying machine center is assigned to a work center group. from the table field | |
| Global Dimension 1 Code | Global Dimension 1 Code | Specifies the code for the global dimension that is linked to the record or entry for analysis purposes. Two global dimensions, typically for the company’s most important activities, are available on all cards, documents, reports, and lists. from the table field | |
| Global Dimension 2 Code | Global Dimension 2 Code | Specifies the code for the global dimension that is linked to the record or entry for analysis purposes. Two global dimensions, typically for the company’s most important activities, are available on all cards, documents, reports, and lists. from the table field | |
| Direct Unit Cost | Direct Unit Cost | Specifies the cost of one unit of the selected item or resource. from the table field | |
| Indirect Cost % | Indirect Cost % | Specifies the percentage of the center’s cost that includes indirect costs, such as machine maintenance. from the table field | |
| Unit Cost | Unit Cost | Specifies the cost of one unit of the item or resource on the line. from the table field | |
| Unit of Measure Code | Unit of Measure Code | Specifies how each unit of the item or resource is measured, such as in pieces or hours. By default, the value in the Base Unit of Measure field on the item or resource card is inserted. from the table field | |
| Capacity | Capacity | Specifies the amount of work that can be done in a specified time period. The capacity of a work center indicates how many machines or persons are working at the same time. If you enter 2, for example, the work center will take half of the time compared to a work center with the capacity of 1. | |
| Efficiency | Efficiency | Specifies the efficiency factor as a percentage of the work center. from the table field | |
| Maximum Efficiency | Maximum Efficiency | Specifies the maximum efficiency factor of the work center. from the table field | |
| Minimum Efficiency | Minimum Efficiency | Specifies the minimum efficiency factor of the work center. from the table field | |
| Simulation Type | Simulation Type | Specifies the simulation type for the work center. from the table field | |
| Shop Calendar Code | Shop Calendar Code | Specifies the shop calendar code that the planning of this work center refers to. from the table field | |
| Calendar Entries Available Until | Calendar Entries Avail. Until | Specifies the last date for which work center calendar entries have been calculated. If this date is in the past, run the Calculate Work Center Calendar report to extend the calendar. from the table field | |
| Search Name | Search Name | Specifies an alternate name that you can use to search for the record in question when you cannot remember the value in the Name field. from the table field | |
| Overhead Rate | Overhead Rate | Specifies the overhead rate of this work center. from the table field | |
| Last Date Modified | Last Date Modified | Specifies when the work center card was last modified. from the table field | |
| Flushing Method | Flushing Method | Specifies the method to use to calculate and handle output at the work center. Manual: Output must be posted manually by using the output journal. Forward: Output is automatically calculated and posted when you change the status of a simulated, planned (or firm planned) production order to Released…. from the table field | |
| Subcontractor No. | Subcontractor No. | Specifies the number of a subcontractor who supplies this work center. from the table field |
Actions
| Group | Action | ToolTip | Runs |
|---|---|---|---|
| Work Ctr. | Capacity Ledger Entries | View the capacity ledger entries of the involved production order. Capacity is recorded either as time (run time, stop time, or setup time) or as quantity (scrap quantity or output quantity). | Page 5832 “Capacity Ledger Entries” |
| Comments | View or add comments for the record. | Page 99000784 “Manufacturing Comment Sheet” | |
| Dimensions | Dimensions-Single | View or edit the single set of dimensions that are set up for the selected record. | Page 540 “Default Dimensions” |
| Dimensions-Multiple | View or edit dimensions for a group of records. You can assign dimension codes to transactions to distribute costs and analyze historical information. | ||
| Work Ctr. | Load | View the availability of the machine or work center, including its capacity, the allocated quantity, availability after orders, and the load in percent of its total capacity. | Page 99000887 “Work Center Load” |
| Statistics | View statistical information, such as the value of posted entries, for the record. | Page 99000756 “Work Center Statistics” | |
| Planning | Calendar | Open the shop calendar, for example to see the load. | Page 99000769 “Work Center Calendar” |
| Absence | View which working days are not available. | Page 99000772 “Capacity Absence” | |
| Task List | View the list of operations that are scheduled for the work center. | Page 99000915 “Work Center Task List” | |
| Processing | Calculate Work Center Calendar | — | Report 99001046 “Calculate Work Center Calendar” |
| Reporting | Work Center Load obsolete Pending 27.0; #if not CLEAN27 | Get an overview of availability at the work center, such as the capacity, the allocated quantity, availability after order, and the load in percent. | Report 99000783 “Work Center Load” |
| Work Center Load/Bar obsolete Pending 27.0; #if not CLEAN27 | View a list of work centers that are overloaded according to the plan. The efficiency or overloading is shown by efficiency bars. | Report 99000785 “Work Center Load/Bar” | |
| Work/Machine Center Load | — | Report 99000792 “Work/Machine Center Load” |
Procedures
GetCurrSelectionFilter(): Text+ BC28
Triggers
OnAfterGetRecord
Relations
- card page Page 99000754 “Work Center Card”
- source table Table 99000754 “Work Center”
Pages and codeunits on this table
- Table 99000754 “Work Center” (drill-down page)
- Table 99000754 “Work Center” (lookup page)
Extended by
Calls
From the extracted call graph of BC29 (graphify-al on the snapshot checkout): calls whose target is known from a declared type or an Object::"Name" argument. Interface dispatch and calls through events are not counted, so the list is not complete.
- Codeunit 46 “SelectionFilterManagement” (1 call:
GetCurrSelectionFilter → GetSelectionFilter)
Recent changes
- 2026-10-02 #12066 Bugs/remove asm inv mfg clean27 tags for wave2 2026 (main, BC30, obsoletion)
- 2026-08-05 #9122 Bug 641488: Add “Calendar Entries Available Until” FlowField to Work/Machine Center (main, BC30, feature)
Countries that replace it
Documented on Microsoft Learn
Source: AL metadata extracted from the code (names, ids, signatures, properties); no code bodies (D10).
Ask your agent
Procedure bodies are not stored here (D10). The call sections above are our own, per object, from the BC29 call graph. For a procedure body or the calls of one procedure, ask bc-code-atlas (external, by Stefan Maron, MIT; default corpus w1-28), which the bc-observatory plugin connects: bcatlas_resolve_node(object_type: "page", object_name: "Work Center List"), then bcatlas_get_procedure_body or bcatlas_get_neighbors on the returned id.